Material (typical): Body: PC, impact resistant
Collect: POM, stainless steel teeth
O-rings: Nitrile rubber
Performance:
1. Blowing Pressure: Between temperatures of -10℃ and +60℃, all connectors size can be used for blowing operations at pressures up to 16bar.
2. Burst Pressure: ＞ 26bar
3. Gas Tightness: Leakage at 16 bar gas pressure: 1ml/minute approx
Leakage at 0.7bar gas pressure: 0.1ml/minute approx
4. Water ingress: The connectors shall seal against a 6m head of water.
5. Insertion force: 50N max (5kg)
6. Retention force: 25N min (3mm m/d) 55N min (5mm m/d) 125N min (8mm m/d)
(collect not held in) 125N min (10mm m/d) 155N min (14mm microduct)
Specification:
|
Reepure code |
Description |
|
MRC-5/3.5-3/2.1 |
5-3mm straight connector, bore 2.1mm |
|
MRC-7/5.5-3/2.1 |
7-3mm straight connector, bore 2.1mm |
|
MRC-7/5.5-5/3.5 |
7-5mm straight connector, bore 3.5mm |
|
MRC-8/6-3/2.1 |
8-3mm straight connector, bore 2.1mm |
|
MRC-8/6-5/3.5 |
8-5mm straight connector, bore 3.5mm |
|
MRC-10/8-7/5.5 |
10-7mm straight connector, bore 5.5mm |
|
MRC-10/8-8/6 |
10-8mm straight connector, bore 6mm |
|
MRC-12/10-7/5.5 |
12-7mm straight connector, bore 5.5mm |
|
MRC-12/10-8/6 |
12-8mm straight connector, bore 6mm |
|
MRC-12/10-10/8 |
12-10mm straight connector, bore 8mm |
|
MRC-12.7/10-10/8 |
12.7-10mm straight connector, bore 8mm |
|
MRC-14/12-10/8 |
14-10mm straight connector, bore 8mm |
|
MRC-14/12-12/10 |
14-12mm straight connector, bore 10mm |
|
MRC-16/12-12/10 |
16-12mm straight connector, bore 10mm |
|
MRC-16/12-14/10 |
16-1414mm straight connector, bore 10mm |
|
MRC-18/14-14/10 |
18-14mm straight connector, bore 10mm |
