A straight connector is used to connect one micro duct to another micro duct with the same diameter.
Material (typical): Body: PC, impact resistant
Collect: POM, stainless steel teeth
O-rings: Nitrile rubber
Performance:
1. Blowing Pressure: Between temperatures of -10℃ and +60℃, all connectors size can be used for blowing operations at pressures up to 16bar.
2. Burst Pressure: ＞ 26bar
3. Gas Tightness: Leakage at 16 bar gas pressure: 1ml/minute approx
Leakage at 0.7bar gas pressure: 0.1ml/minute approx
4. Water ingress: The connectors shall seal against a 6m head of water.
5. Insertion force: 50N max (5kg)
6. Retention force: 25N min (3mm m/d) 55N min (5mm m/d) 125N min (8mm m/d)
(collect not held in) 125N min (10mm m/d) 155N min (14mm microduct)
Specification:
|
Reepure code |
Description |
|
MSC-3/2.1 |
3mm straight connector, bore 2.1mm |
|
MSC-4/2.5 |
4mm straight connector, bore 2.5mm |
|
MSC-5/3.5 |
5mm straight connector, bore 3.5mm |
|
MSC-6/4 |
6mm straight connector, bore 4mm |
|
MSC-7/3.5 |
7mm straight connector, bore 3.5mm |
|
MSC-7/4 |
7mm straight connector, bore 4mm |
|
MSC-7/5.5 |
7mm straight connector, bore 5.5mm |
|
MSC-8/3.5 |
8mm straight connector, bore 3.5mm |
|
MSC-8/6 |
8mm straight connector, bore 6mm |
|
MSC-10/6 |
10mm straight connector, bore 6mm |
|
MSC-10/8 |
10mm straight connector, bore 8mm |
|
MSC-12/8 |
12mm straight connector, bore 8mm |
|
MSC-12/10 |
12mm straight connector, bore 10mm |
|
MSC-12.7/10 |
12.7mm straight connector, bore 10mm |
|
MSC-14/10 |
14mm straight connector, bore 10mm |
|
MSC-14/12 |
14mm straight connector, bore 12mm |
|
MSC-16/12 |
16mm straight connector, bore 12mm |
|
MSC-16/13 |
16mm straight connector, bore 13mm |
|
MSC-16/14 |
16mm straight connector, bore 14mm |
|
MSC-18/12 |
18mm straight connector, bore 12mm |
|
MSC-18/14 |
18mm straight connector, bore 14mm |
|
MSC-18/16 |
18mm straight connector, bore 16mm |
|
